Panasonic TX-L47DT65B LED Flightcases

Range of flightcases designed for transporting the Panasonic TX-L47DT65B LED Screen without the units base stand attached

Case Design 1: Single unit transport case
Manufactured from 6.5mm laminate hexagrip – black or stucco – silver (cost option)
4 x Butterfly catches on the sides with loops for padlocks hold the lid closed (padlocks not supplied)
2 x Recessed dish handles, 1 on each short end lid
Ball Corners
Fully foam lined with space behind screen for bracket or accessories
Approx lid/base split 1/3rd – 2/3rds
4x 4″ Orange wheel castors (2x braked) bolted to base with 15mm birch ply dolly boards (cost option)
(please note on the single unit transport case the wheel boards will protrude from the side of the flightcase)

Case Design 2: Single unit transport case with accessory compartment
Manufactured from 9.5mm laminate hexagrip – black or stucco – silver (cost option)
4 x Butterfly catches on the sides with loops for padlocks hold the lid closed (padlocks not supplied)
6 x Recessed dish handles (2 in each long side base & 1 in each short end lid)
Ball Corners
Solid fixed wooden partition fully foam lined to create seperate compartment for screen & accessories
Main compartment for screen has 70mm space behind screen to allow bracket to be left attached
Approx lid/base split 1/3rd – 2/3rds
4x 4″ Orange wheel castors (2x braked) bolted to base with 15mm birch ply dolly boards (cost option)

Case Design 3: Twin unit transport case & wheels
Manufactured from 9.5mm laminate hexagrip – black or stucco – silver (cost option)
4 x Butterfly catches on the sides with loops for padlocks hold the lid closed (padlocks not supplied)
6 x Recessed dish handles (2 in each long side base & 1 in each short end lid)
Ball Corners
Solid fixed wooden partition fully foam lined to create 2 seperate compartment for screens
Each compartment has 70mm space behind screen to alow bracket to be left attached to screen
Approx lid/base split 1/3rd – 2/3rds
4x 4″ Orange wheel castors (2x braked) bolted to base with 15mm birch ply dolly boards (cost option)

Now available in flightpanel which reduces the weight of the case by approx 20% (excluding castors)